To test the DB9 output on the DM-100, connect pins 6 & 8 and 5 & 9 (for hardwire communication systems) or pins 2 & 3 (for radio systems).Step 2: Put loopback in place at the desired test point. (If loopback is not already in place, DM-100 will tell you which pins to connect these pins are only for testing the DB9 output on the DM-100 and on the RS232 Cable). Using the arrow buttons, scroll down to CURRENT LOOP (for hardwire) or RS232 COM0 (for radios) and press Enter.Using the arrow buttons, scroll to PORT TESTS and press Enter.Using the arrow buttons, scroll to DIAGNOSTICS and press Enter.Power up the DM-100 handheld using a wall pack transformer (T-1118).DM-100 - ED-13374 (Rev 5.4 or higher). (This is displayed on the boot up of the handheld). ![]() ![]() T-1118 TRANSFORMER 12VAC WALLPACK 6' CORD COAXIAL.
0 Comments
Leave a Reply. |